Filter
Top Products
FIRST INSTALLATION RECOMMENDATIONS ENG
Page 14
9 FIRST INSTALLATION RECOMMENDATIONS
9.1 POWER SUPPLY CABLE
A power supply cable of approx. 2 mt length is supplied with the device, which has a moulded IEC plug attached
– this is a legal requirement.
The type of plug for the power supply depends on the country in which it is delivered.
If for any reason, you need to use this appliance with a different plug, you should use the following wiring
guidelines in replacing the exsisting plug with the new one:
Earth
Green, or green and yellow
Neutral (N)
Blue
Live (L)
Brown
Supply cables should be laid in such a manner that one does not step or walk on them. They should not be
squashed by any objects.
THIS EQUIPMENT MUST BE EARTHED.
The chassis is always connected to mains earth to ensure your safety: check your mains wiring and earthing
before switching on.
9.2 AC MAINS VOLTAGE SETTING (230 V / 115 V)
BE SURE THAT THE UNIT IS SET TO THE CORRECT MAINS/LINE VOLTAGE FOR YOUR
COUNTRY BEFORE PLUGGING IT INTO THE WALL OUTLET !
The actual Mains voltage is indicated on the label
stuck on the equipment closure. Should the type of power at
the operation location not be known, please contact your dealer or electricity company.
Model :
Manufacturer
S-N :
X
XX
VA
VA
mAT
mAT
230V
115V
KKKK
If, for some reason, the unit is to be operated at a mains input voltage which is different to that as supplied, you
need to open the top cover and set properly the voltage change-over switch
which is located inside, close to
the transformer. You also need to replace the AC main fuse, according to information provided on the external
label or on the Technical Specifications table at the end of this user manual.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, ALWAYS DISCONNECT
THE AC MAINS CABLE BEFORE ALTERING THE CHANGE-OVER SWITCH. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.