Filter
Top Products
FM VERSION DESCRIPTION ENG
Page 18
11.2 REAR PANEL VIEW (FM VERSION)
1
ON/OFF main switch, the led inside switchs on/off accordingly. If it is off while the switch is ON, please
check the supplied AC cord and the fuse.
AC outlet: IEC power cord receptacle. AC voltage change-over switch is located inside the box, closed to
the AC transformer
2
Digital input*. It features two connectors: XLR female for coaxial connections and tos-link for optical
connections
3
RS232 Serial Ports: optoisolated serial ports for connection to PCs or satellite receivers.
4
Sync-in (not connected)
5
Sync-out: Synchronism output. It provides 19KHz tone at 5Vpp to lock external equipment (for instance
RDS coders)
6
Out It features Stereo Composite signal or Stereo Composite signal +RDS (with or without signals
injected from Aux 1 and 2 mixed into). The output is set for a 75 Ohm load
7
Multipurpose Aux In (for external RDS, SCA, etc..): the injected signal is adjusted by the related
trimmer (near to the Bnc), mixed to the Falcon 15 internally generated signal and output by the main Out
connector. Factory preset: 0 dB gain
8
Multipurpose Aux In (for external RDS, SCA, etc..): the injected signal is adjusted by the related
trimmer (near to the Bnc), mixed to the Falcon 15 internally generated signal and output by the main Out
connector. Factory preset: 0 dB gain
9
Analog Input: bi-channel audio input electronically balanced on XLR female. The input level is set via the
menu
10
Digital Data Port: SubD 15-pin female Interface. It provides 3 optoinsulated “trigger” inputs (for RDS M/S
and TA service enabling and for splitting mode control)
* available as an option (DG-IN option – ref to Chapter 2)