Filter
Top Products
IN / OUT SETTINGS (ST version) ENG
Page 47
14.3.4 MONO - STEREO OPERATION
The Audio Module Setup / Process Mode menu selects the mono versus stereo operation of the audio output.
In particular:
-
Selecting Mono (Left) the Left input channel only will be processed and output on both the L and R outputs.
-
Selecting Mono (Left+Right) the sum of the left and right audio inputs will be processed and output on both
the L and R outputs.
14.3.5 NOISE GATE SETTING (Noise Gate)
The Audio Module Setup / Noise Gate function allows you to avoid the effects of background noises while the
input signal presents a lack of high frequencies. The parameter to be set is the Noise Gate Threshold, which
determines the threshold value below which the dynamic pre-emphasis is automatically excluded.
The Noise Gate Threshold: This may be adjusted within a range of –80 to –51dB (1 dB steps).
The Noise Gate function can be turned off if necessary by turning the shuttle counter-clockwise to the Off
position.