Filter
Top Products
Maintenance, Storage and Customer Service
Maintenance, Storage and Customer Service
Maintenance
The maintenance of the unit is confined to cleaning the interior and exterior of the
unit.
Unit calibration
The calibration interval depends on the use and demand, and should be made
every 1 and 2 years. The calibration can be carried out by the KATHREIN cus-
tomer service centre (see below).
Exterior cleaning
The exterior of the unit is cleaned when needed with a soft, not fibrous dusting rag
or brush. For very dirty areas, a spirit or mild soap agent can be used. Never use
solutions such as nitro-thinner, acetone etc, because these could damage the writ-
ing on the front panel or the plastic parts.
Interior cleaning
The unit should be regularly dusted in the exterior every 1 to 2 years to ensure
adequate ventilation. The cleaning interval depends on the amount of dust of the
operating space. The housing cover is removed for cleaning the interior of the unit.
The dust can be removed with the brush or with compressed air.
Function testing
It is recommended to check the given required data in the measured time intervals.
The data and its tolerances are taken from the data sheet.
Required means of measurement:
- TV / Sat test signal generator e.g. Grundig VTG 700
- DVB test signal generator e.g. Rohde & Schwarz SFQ
Exchange of components
The modular construction principle of the MSK 33 allows an exchange of compo-
nents by the user. Contact our service centre before each component exchange.
Storage
The storage temperature range of the unit is: -40...+70°C.
When the unit is stored for a longer period of time, it should be protected from dust.
Customer service
Send the unit to the following address for servicing and calibrating:
Fa. ESC
Kathrein Zentralkundendienst
Bahnhofstr. 108
D-83224 Grassau
Tel.: 08641/9545-25
Fax: 08641/9545-35
E-Mail: ESC-Grassau@t-online.de
96