Filter
Top Products
System Menu
System Menu
Calls up the SYS-
TEM menu
BACK
time
date
click
off
fact.
setup
S0 operating system
S1 FPGA firmware
-SOFTWARE-VERSIONS-
BE --- -- ----
S0 = V8.1 S1 =V2.1
serv
TIME: 14:31:26
DATE: 14.11.01
SN : 00612
The screen displays the
following in the individual fields:
Software versions of the modules
(S0 shows information about the operating
software, S7 shows the software of the
graphic card). These are followed by the
series number (SN: -------) as well as the
time and date.
Setting the date
Press the softkey. The
field „DATE“ lights up
yellow and the date field
flashes. The date can
now be entered in with
the numerical buttons.
Setting the time
After pressing this softkey, the field „TIME“ lights up yellow and the time field
flashes. The time can now be entered in with the numerical buttons.
Click button
With this button, a peep tone for the keyboard can be generated and switched off.
click
off
Factory setting
By pressing this button, all display settings can be reset to the factory settings.
No user function. It is only required for service purposes.
Note:
From the software version S0=V7.0 and higher, the graphic software S1=2.1
must be downloaded.
+
S1=V2.1 is not downwards compatible. It can not longer carry out a pano-
ramic printout.
60