Filter
Top Products
TV Operation
Analogue menu
Calls up the TV menu
A
Selecting the standard
With this softkey, the
following standards can
be selected: B/G, D/K, I,
L, M, M – jap. (Japan)
and N. Refer to the audio
carrier table.
In this menu, the channel setting can be
changed using the cursor buttons, ◄►. In
the RP menu, the receiving frequency can
be changed in this manner.
Audio carrier table for TV reception
The given audio carrier frequencies are based on the video audio carrier
spacing
Standard
Audio carrier 1
(sc1)
A
udio carrier
(sc 2)
Audio carrier (1 +2
sc)
NICAM
(nicam)
B/G 5.50 MHz 5.74 MHz
sc 1: 5.50 MHz
sc 2: 5.74 MHz
5.85 MHz
L 6.50 MHz (AM) 5.85 MHz
D/K 6.50 MHz 6.26 MHz
sc 1: 6.50 MHz
sc 2: 6.26 MHz
5.85 MHz
I 6.00 MHz 6.552 MHz
M 4.50 MHz 4.72 MHz
sc 1: 4.50 MHz
sc 2: 4.72 MHz
M (Japan) 4.50 MHz
N 4.50 MHz
Selecting the audio carriers
By pressing the button, the MSK 33 can be set to the following reception types:
Audio carrier 1 (sc1) ·
·
·
·
Audio carrier 2 (sc2)
Stereo (sc1 + sc2)
NICAM (nicam)
Level-dependent acoustic signal
In the function, „level beep,“ the acoustic signal is generated, whose pitch is pro-
portionate to the received signal level. With this, it is possible to optimally align the
receiving antenna to a transmitter.
Carrying out measurements
By pressing the button, the MSK 33 is set to analogue reception and measures the
following values:
- Audio carrier spacing of TT1 (sc1) and TT2 (sc2)
- Nicam audio carrier spacing (if available)
– Nicam bit error rate (BER)
45