Filter
Top Products
Sat Operation
Sat Operation
Sat menu
<>sat
frq
LNB
CONTROL
digit
DVBS
SAT
MEASURE
BACK
analog
Call up the main menu
Entry of the transponder frequency from 00,000 MHz to16,000 MHz
The field lights up yellow, as soon as a softkey is pressed. Now, the transponder
frequency can be entered-in using the numerical buttons „0-9“ and „MHz“ or
changed with the cursor buttons, ◄►. The transponder frequency is displayed in
the lower left-hand corner of the on screen display. The receiving frequency de-
pends on the selected LO frequency. The setting of the LO frequency is made in
the menu ‚LNB-CONTROL.‘ The entry of the Sat IF is only possible, if the LO fre-
quency LO-0 (00000) has been set.
If the oscillator frequency (LO-0 to LO-9) is set, and the resulting
receiving frequency lies out of the Sat receiving range
(920...2150 MHz) of the MSK 33, this display shown on the left
appears. Correct the LO frequency or the frequency entry after
this message appears.
GExample
Reception and level measurement of a Sat programme:
Transponder frequency 11,348 MHz vertical with a LNB with a LO frequency of
9.75 MHz.
By pressing the softkey SAT in the main menu, the unit switches to satellite recep-
tion.
25