Filter
Top Products
–
26
–
EN
After select the DivX
®
file, the SUBTITLE LIST will
appear except when the “DivX SUBTITLE” setting
is “OFF”. Refer to “Language Setting” on page 29.
1
Press the Cursor buttons (K or L) to select the
desired extension you want to display, then press
the
ENTER button. DivX
®
with the subtitle starts
playback. The subtitle cannot be displayed when
the setting is “OFF”.
• If there is more than one extension, the extension
selection appears in the SUBTITLE LIST.
NOTES:
• DivX
®
subtitle can only be displayed according to the
same name with an extension of the DivX
®
file name.
• Files whose extension is other than “.SMI”, “.smi”,
“.SRT”, “.srt”, “.SUB” and “.sub” will not be listed in the
SUBTITLE LIST.
• This unit cannot be recognised if the DivX
®
file and its
subtitle file are not in the one folder.
• The subtitle may not be displayed if the file size is too
large.
•To change the subtitle, refer to “Subtitle Language” on
page 27 if multiple subtitles are available.
• The subtitle cannot display if the on-screen information
is displayed.
• If “DivX SUBTITLE” is set to “OFF” in LANGUAGE
menu, the SUBTITLE LIST will not be displayed even if
you select a DivX
®
file with created subtitle.
•
Unrecognisable characters will be replaced with asterisks.
2
The subtitle created by the user can be displayed during
DivX
®
playback.
DivX
®
DivX
®
Subtitle
FILE :
FILE LIST : MENU
file name1
[OFF]
[SMI]
[SRT]
[SUB]
SUBTITLE LIST
Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current play-
back status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
(T:Track repeat/ A: All tracks repeat/
AB:A-B repeat)
Press the DISPLAY button again.
• Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
(T:Track repeat/ A: All tracks repeat/
AB:A-B repeat)
• On Audio CDs, when you are playing back a disc in
programme or random mode, PROGRAM (or
RANDOM) will be displayed.
Press the DISPLAY button again.
• During programme or random playback, each playback
status will be displayed when you press the DISPLAY
button.Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
Press the DISPLAY button again to exit.
4
3
2
1
CD
Super
Audio CD
VCD
You can check information about the current disc by pressing
the DISPLAY button.
Press the DISPLAY button during playback.
• Current chapter number/total
chapters, elapsed time and
remaining time of the current
chapter, and current playback
status will be displayed.
Press the DISPLAY button again.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
Press the DISPLAY button for the third time.
• The bit rate (the amount of
video data currently being
read) and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
(C:Chapter repeat/ T:Title repeat/
AB:A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
3
2
1
DVD-V
IIIIIII
T L1
Changing the On-Screen Display
9/49 0:00:00 -0:03:30
Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current play-
back status will be displayed.
Press the DISPLAY button again.
• Current group number/total groups, elapsed time and
remaining time of the current group, and current play-
back status will be displayed.
Press the DISPLAY button
again.
• The bit rate and current play-
back status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
(T:Track repeat/ G: Group repeat/
AB:A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
Press the DISPLAY button again.
• During all group, programme or random playback, each
playback status will be displayed when you press the
DISPLAY button.Then press the DISPLAY button
again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
Press the DISPLAY button again to exit.
5
4
3
2
1
DVD-A
IIIIIII
T L1
DISC PLAYBACK
Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
Press the DISPLAY button again to exit.
5
4