Filter
Top Products
–
21
–
EN
English
DISC PLAYBACK
Marker Setup Screen
You can use markers to memorise your favourite places on
a disc.
Press the SEARCH MODE
button repeatedly until the
display screen and Markers
appear during playback.
Press the
Cursor buttons (s or B) to select the
number of the marker (1-10) and ensure that
“_ _ _ _ : _ _ : _ _” appears on the display.
When the disc reaches the point where you want
to remember, press the
ENTER button.
• The title or track and elapsed playback time will
appear on the TV screen.
To return to the Marker later, press the SEARCH
MODE
button repeatedly during playback and the
Cursor buttons (s or B) to choose a desired
marker, then press the
ENTER button.
Press the
SEARCH MODE or RETURN button to
exit.
NOTES:
• Opening the disc tray, turning off the power, or select-
ing AC at step and pressing the ENTER button will
erase all Markers.
•To clear a marker, using the Cursor buttons (s or B)
button, select the marker number to be cleared and
press the CLEAR button.
•You can mark up to 10 points.
2
5
4
3
2
1
CD
Super
Audio CD
VCDDVD-ADVD-V
--
--
:
--
:
--
1 2 3 4 5 6 7 8 9
10
AC
To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
DVD-V
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
Repeat
REPEAT TITLE / CHAPTER
• The REPEAT button is available only during playback.
CHAPTER TITLEOFF
(current chapter repeat) (current title repeat)
(repeat off)
Press the SEARCH MODE but-
ton.
• The track search display
appears.
Within 30 seconds, select a desired track number using
the
Numeric buttons.
•For the disc with less than 10 tracks, press the track
number directly.
•For discs with 10 or more but less than 100 tracks, to
play back a single-digit track, press 0 first, then the
track number (e.g. for track 3, press 0, 3). To play back
a double-digit track, press the track number.
•For discs with 100 or more tracks, to play back a sin-
gle- or a double-digit track, press 0 first, then the track
number (e.g. for track 3, press 0, 0, 3, and for track 26,
press 0, 2, 6).To play back a triple-digit track, press the
track number.
• Press the CLEAR button to erase the incorrect input.
NOTE:
• The +10 button can also bring up the track search dis-
play except for the disc with less than 10 tracks. For
such a disc, track search can be done by just pressing
the track number.
2
1
There are two ways to begin playback a disc at a specific
track.
DivX
®
WMA
JPEGMP3CD
Super
Audio CD
VCDDVD-A
Track Search
Press the SEARCH MODE
button until the time search
screen appears on the TV
screen.
Within 30 seconds, enter a desired time point on
the disc with the
Numeric buttons.
• Playback will start at the specified time.
•For Time Search, “0” appears automatically when there
is no need to enter a number. For example,
“0:0_:_ _” appears on the time search screen if the total
time of the title or track is less than 10 minutes.
Press the CLEAR button to erase an incorrect
input.
NOTE:
•For some DivX
®
files, Time Search may not function.
3
2
1
DivX
®
CD
Super
Audio CD
VCDDVD-ADVD-V
__/ 15
1:23:45
-
:
--
:
--
During playback, press the
SKIP
GG
button to move to the
next track. Press it repeatedly to skip to subsequent tracks.
Press the
SKIP
HH
button to go back to the beginning of the
current track. Press it repeatedly to go to the previous tracks.
•Track number will appear briefly on the front panel display.
• If the
SKIP H or G button is pressed while the playback
is paused, the playback will be paused again after skipping
to the next track.
NOTE:
• The SKIP H and G buttons are not available when
playback is stopped.
By using the SEARCH MODE button
By using the SKIP buttons
HH GG
Time Search