Filter
Top Products
69
DSP surround simulation
1
Select the surround mode for the input channel.
DIRECT STEREO DOLBY / DTS
WIDE
SCREEN
5CH / 7CH
STEREO
DSP
SIMULATION
SURROUND MODE
(Main unit)
The surround mode switches in the following order each time the
DSP SIMULATION button is pressed:
1 32, 3
2
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
NOTES:
• When “Default” is selected and the 0 cursor button is pressed, “CINEMA EQ.” and “D. COMP.” are automatically set to “OFF”. In addition,
“ROOM SIZE” is set to “medium”, “EFFECT LEVEL” to “10” and “DELAY TIME” to “30ms”.
• The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
WIDE SCREEN SUPER STADIUM ROCK ARENA
JAZZ CLUB CLASSIC CONCERT
MONO MOVIE
MATRIX
3
Set the parameters.
SURROUND
PARAMETER
SELECT
4
Press the SURROUND PARAMETER button to complete the setting.
Stop pressing buttons (main unit) once you have completed setting the surround parameters. After several
seconds the normal display reappears and the settings you have made are automatically set.
(Main unit)
3
2, 4
1
“WIDE SCREEN” is not displayed when the operation is
performed with the buttons on the main unit.
(Remote control unit)
SURROUND
PARAMETER
(Main unit) (Remote control unit)
(Remote control unit)
(Remote control unit)