Filter
Top Products
53
[3] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
1
Press the REC/MULTI button until “M-
ZONE SOURCE” appears on the set’s
display.
REC / MULTI
1, 4
1, 2
2, 4
(Main unit)
VCR -1 -2 -3 V.AUX / TAPE
PHONO CD TUNER DVD / VDP TV / DBS
MULTI
2
M-ZONE SOURCE
Display
2
Select the source you want to record
appears on the set’s display.
• The MULTI indicator lights.
• The indicator for the selected
program source light.
• When the AVR-4802R is in the REC
OUT mode, the source cannot be
output using the “MULTI” mode on
the remote control unit.
SELECT
(Main unit)
3
Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
NOTES:
• The signals of the source selected in the Multi mode are also
output from the TAPE and VCR recording output terminals.
• Digital signals are not output from the MULTI ZONE audio
output jacks.
When “Multi” is selected for the system setup’s multi-zone setting,
the source selected here is output from the SB/MULTI speaker
terminals.
The volume can be adjusted and input source can be selected using
the VOLUME + (up) and – (down) buttons on the remote control unit’s
“MULTI” mode.
4
To cancel, press the REC/MULTI button and select
“SOURCE”.
REC / MULTI
(Main unit)
SELECT
3
2
1
4
5
2
Press the MULTI ZONE “ON” button.
To cancel the MULTI mode.
Press the MULTI ZONE “OFF”
button.
(Remote control unit)
3
Press the input source button
• The MULTI ZONE source switches directly.
4
The output level of the MULTI ZONE
OUT terminals can be controlled using
the VOLUME + (up) and – (down)
buttons on the remote control unit.
The output level of MULTI ZONE OUT
can be controlled only if MULTI ZONE
vol. level is set “Variable” at Multi Zone
Control in System Setup Menu. (See
page 29)
(Remote control unit)
DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- - - dB (MINIMUM)
5
When the MULTI ZONE SOURCE
function is set to TUNER, the preset
channel can be selected using the
CHANNEL + (up) and – (down) buttons
on the remote control unit.
(Remote control unit)
The main zone output can be
turned on and off with the
“MAIN ON/OFF” button.
[4] Remote control unit operations during multi-source playback (selecting the input source)
1
Select “MULTI” using the AMP button.
(Remote control unit)
This operation is possible when MULTI mode is selected.
This operation is not possible in the REC OUT mode.