Filter
Top Products
57
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.
Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1
MAIN UNIT:
Press the CH VOL button, and select
“FADER”.
REMOTE CONTROL UNIT:
Select “FADER”.
The channel switches in the order shown below each time
this button is pressed.
2
The fader function does not affect the SW channel.
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
This is only displayed when setting the fader control.
FL C FR SR SBR SBL
SLSW
FADER
MAIN UNIT:
Turn the SELECT knob clockwise to
adjust the volume of the surround side
collectively. Turn the CONTROL knob
counterclockwise to adjust the volume of
the front side collectively.
REMOTE CONTROL UNIT:
Press the ª button to reduce the volume
of the front channels, the • button to
reduce the volume of the rear channels.
SELECT
(Main unit)
21
CH VOL
(Main unit)
(Remote control unit)
(Remote control unit)
1
2
2