62
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
INPUT SELECTOR
(Main unit) (Remote control unit)
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 28).
INPUT MODE
(Main unit) (Remote control unit)
w Set the input mode to “AUTO”.
2
Select the Surround mode.
DOLBY / DTS
(Main unit) (Remote control unit)
3
Play a program source with the , mark.
1-w 54, 52
1-q
33
1-w
1-q
2
5
4, 6
Playback with digital input
4
Display the surround parameter menu.
5
6
Press the SURROUND PARAMETER button to complete the setting.
When operation is by a main unit button, there will be a return to the regular display several seconds after the
operation is stopped.
(Remote control unit)
DIGITAL
• The DTS indicator lights when playing
DTS sources.
Light
Light
SIGNAL
DETECT
• The SIGNAL DETECT indicator lights
when playing sources on which a
special identification signal is
recorded.
Light
• The Dolby Digital indicator lights
when playing Dolby Digital sources.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
q Select the various parameters.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
w Adjust the parameter settings.
SELECT
(Main unit) (Remote control unit)