Filter
Top Products
49
Playback using the external input (EXT. IN) jacks
1
Set the external input
(EXT. IN) mode.
Press the EXT. IN (or the
EXT. IN button on the remote
control unit) to switch the
external input.
Once this is selected, the input signals connected to the
FRONT-L , FRONT-R, CENTER, SURR.-L (surround left),
SURR.-R (surround right) SB-L (surround back left) and SB-R
(surround back right) channels of the EXT. IN jacks are output
directly to the front (left and right), center, surround (left and
right) and surround back (left and right) speaker systems as
well as the pre-out jacks without passing through the
surround circuitry.
In addition, the signal input to the SW (subwoofer) jack is
output to the PRE OUT SW (subwoofer) jack.
EXT. IN
(Main unit)
(Remote control unit)
2
Cancelling the external input mode
To cancel the external input (EXT. IN) setting, press the INPUT
MODE or ANALOG button to switch to the desired input
mode.
(Remote control unit)
INPUT MODE
ANALOG
(Main unit)
• When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, HOME THX CINEMA,
WIDE SCREEN, 5CH/7CH STEREO or DSP SIMULATION) cannot be set.
NOTES:
• In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be
output from channels not connected to the input jacks.
• The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video
signal is connected, then set this mode.
12
2
1
Playing audio sources (CDs and DVDs)
The AVR-4802R is equipped with three 2-channel playback modes exclusively for music.
Select the mode to suit your tastes.
1
PURE DIRECT mode
In this mode, the music is played with an extremely high level
of sound quality.
When this mode is set, all the video-related circuits are turned
off so that music signals can be reproduced with high quality.
When an analog mode is selected, the digital processing
circuitry is also turned off to achieve analog sound with even
higher purity.
PURE
DIRECT
(Main unit) (Remote control unit)
4
1
32
The display is off in the PURE DIRECT mode.
PURE
DIRECT
DIGITAL
SIGNAL
PURE DIRECT display lights.
1
3
2