Filter
Top Products
50
2
DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass
such circuits as the tone circuit and are transmitted directly,
resulting in good quality sound.
DIRECT
(Main unit) (Remote control unit)
3
STEREO mode
Use this mode to adjust the tone and achieve the desired
sound while watching images.
STEREO
(Main unit) (Remote control unit)
4
VIDEO ON/OFF button
When no video signals of a DVD, etc., are connected to the
AVR-4802R and the DVD, etc., are connected directly to a TV,
etc., the unneeded video circuitry can be turned off by
selecting the “VIDEO OFF” setting.
VIDEO
ON / OFF
(Main unit)
NOTES:
• The system setup function cannot be used when the PURE DIRECT
mode is set or the “VIDEO OFF” setting is selected. To use the
system setup function, cancel the PURE DIRECT mode or select
the “VIDEO ON” setting.
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
• When the PURE DIRECT button is pressed while in the PURE
DIRECT mode, the PURE DIRECT mode is cancelled and the
DIRECT mode is set.
• The crossover frequency setting must be set to “FIXED-THX-” in
the system setup in order to turn off the digital circuit when in the
analog input mode in the PURE DIRECT mode. (See page 20.)
After starting playback
[1] Adjusting the sound quality (tone control)
The tone control function will not work in the DIRECT, PURE DIRECT and Home THX Cinema mode.
1
The tone switches as follows each time the
TONE CONTROL button is pressed.
2
With the name of the volume to be
adjusted selected, turn the SELECT
knob to adjust the level.
TONE
CONTROL
SELECT
2 13
BASS
TREBLE
(Main unit)
(Main unit)
• To increase the bass or treble: Turn the control clockwise.
(The bass or treble sound can be increased to up to +12 dB
in steps of 2 dB.)
• To decrease the bass or treble: Turn the control clockwise.
(The bass or treble sound can be decreased to up to –12 dB
in steps of 2 dB.)
3
If you do not want the bass and treble to be
adjusted, turn on the tone defeat mode.
The signals do not pass through the bass
and treble adjustment circuits, providing
higher quality sound.
TONE
DEFEAT
(Main unit)