Filter
Top Products
Other Operations and
Functions
Other Operations
Playing Super Audio CD
1
Assign the HDMI input connector at the "HDMI In"
setting (vpage 35).
2
Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” indicator lights on the display.
3
Use INPUT MODE to select “Auto” (vpage 34).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 36 ~ 38).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
Shuffling playback
Press [CHANNEL +].
[Selectable items]
Albums
Songs
OFF
MENU : ”Input Setup” – ”iPod” – “Shuffle” (vpage 36)
Searching up or down pages
Press [SEARCH], then press o (down) or p (up).
To cancel, press ui or [SEARCH].
To switch between the Browse and Remote modes
Either press and hold [SEARCH].
• The title name, artist name and album name can be checked by
pressing <STATUS> during playback.
• On the AVR-2808CI, folder and file names can be displayed as
titles. Any characters that cannot be displayed are replaced with “ .
(period)”.
• The time for which the menus are displayed can be set at menu
“Manual Setup” – “Option Setup” – “On-Screen Display” – “iPod
Information” (vpage 32).
Viewing Still Pictures or Videos on the
iPod
Photo and video data on the iPod can be viewed on the monitor.
Only for iPod equipped with slideshow or video functions. (When
using an ASD-1R)
1
Press and hold [SEARCH] to set the Remote mode.
“Remote iPod” is displayed on the AVR-2808CI’s display.
2
Watching the iPod’s screen, use ui to select
“Photos” or “Video”.
3
Press ENTER until the image you want to view is
displayed.
“TV Out” at the iPod’s “Slideshow Settings” or “Video Settings” must
be set to “On” in order to display the iPod’s photo data or videos on
the monitor. For details, see the iPod’s operating instructions.
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting