Filter
Top Products
Auto Preset
Use the auto preset function to program radio stations.
[Input source]
TUNER
[Selectable items]
Start
: Start the auto preset process.
If an FM station cannot be preset automatically, select the desired
station by tuning it in manually, then preset it manually.
Preset Skip
Set the preset memories that you do not want to display when
tuning.
A ~ G
Select the preset channel(s) you do not want to display.
[Input source]
TUNER
XM
[Selectable items]
ON
: Display this number.
Skip
: Skip this number.
Preset Name
Assign name to a preset memory.
Names containing up to 8 characters can be input.
A1 ~ G8
Select the preset memory number.
[Input source]
TUNER
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! # % & ’ ( ) * + , - . / : ; = “ ? @ [ \ ] (space)
Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 35).
Input Mode
Set the input mode for this source.
[Input source]
TUNER
PHONO
[Selectable items]
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
XM
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
HDMI
: Play only signals from HDMI input. Excluding CD.
Digital
: Play only signals from digital input.
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
• When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
Operating from the main unit or main remote
control unit
Press the INPUT MODE button on the main unit or the INPUT button on
the main remote control unit.
Auto HDMI Digital
AnalogEXT. IN
z1
z2
z1: This can be selected for input sources for which the menu
“Assign” setting is set to “HDMI” (vpage 35). Excluding CD.
z2: This can be selected for input sources for which the menu
“Assign” setting is set to “Digital” (vpage 35).
Rename
Change the display name for this source.
Names containing up to 8 characters can be input.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! # % & ’ ( ) * + , - . / : ; = “ ? @ [ \ ] (space)
Decode Mode
Set the decode mode for this source.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR DVR
V.AUX
[Selectable items]
Auto
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
• This can be selected for input sources for which the menu “Assign”
setting is set to “HDMI” or “Digital” (vpage 35).
• Only set “PCM” and “DTS” when playing the respective signals.
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
Settings Related to Playing Input
Sources