Filter
Top Products
1
Press [MODE SELECTOR] for the device you want to
reset.
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9], [7] and [6], in that order.
The signal transmission indicator flashes twice.
4
Press the button you want to reset twice.
The signal transmission indicator flashes twice.
Resetting the Main Remote Control Unit
Learning Function
GResetting button by buttonH
1
Press [MODE SELECTOR] for the device you want to
reset.
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9], [7] and [6], in that order.
The signal transmission indicator flashes twice.
4
Press [MODE SELECTOR] for the device you want to
reset twice.
The signal transmission indicator flashes twice.
GResetting by device modeH
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9], [7] and [8], in that order.
The signal transmission indicator flashes twice.
3
Press [SYSTEM CALL] (1, 2 or 3) you want to reset.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1
Press [MODE SELECTOR] for the device you want to
reset (TV or SAT/CBL).
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9], [8] and [4], in that order.
The signal transmission indicator flashes twice.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9], [8] and [1], in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
System call function
Punch-through function
All settings
Adjusting the Backlight’s Brightness
The display’s brightness can be adjusted in 5 steps.
(Default: Step 3)
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [CHANNEL +] or [CHANNEL –].
The display gets one step brighter when [+] is pressed.
The display gets one step darker when [–] is pressed.
3
Press [RC SETUP] to complete the setting.
Sub Remote Control Unit
The sub remote control unit (RC-1071) included with the AVR-
2808CI can be used as the exclusive multi-zone remote control
unit.
b The following describes operation for the selected zone. (Use
[ZONE SELECT] to switch zones.)
• Turning the multi-zone power on and off
• Selecting the input source to be played
• Adjusting and temporarily muting the multi-zone volume
• Listening to the tuner
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
[CHANNEL+ /
–
]
[POWER OFF]
[REPEAT]
[POWER ON]
[RANDOM]
[SHIFT]
[MUTE]
[VOLUME+ /
–
]
[SOURCE SELECT]
[ZONE SELECT]
[TUNING+ /
–
]
[8],[9],
[1/3],[2]
ZONE SELECT Switching the zone to be operated
POWER OFF Power off
POWER ON Power on
SOURCE SELECT Switching the input zone
VOLUME + / - Volume control
CHANNEL + / - Channel + / –
TUNING + / - Tuning + / –
MUTE Muting
SHIFT Switching the memory block
8 9
Auto search (cue)
2
Stop
1/3
Play / Pause
REPEAT 1-track / All -track repeat play
RANDOM 1-track / album shuffle play
b When using a Control Dock for iPod (ASD-1R),
[
FAVORITES DIRECT
PLAY] cannot be used.