Filter
Top Products
• With HDMI, the video and audio signals are transferred simultaneously.
If you want to play the video signal assigned at “HDMI In” together
with the audio signal assigned at “Digital In”, set “Input Mode” on
the menu to “DIGITAL” (vpage 34).
• When the AVR-2808CI and monitor are connected with an HDMI
cable, if the monitor is not compatible with HDMI audio signal
playback, only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
Assign
Assign input sources to input connectors.
HDMI
Select HDMI connector to assign to this source.
[Input source]
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
1
: Assign HDMI1 input connector.
2
: Assign HDMI2 input connector.
None
: No HDMI input connector assigned.
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
HDMI1 HDMI2 None None None None None
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
iPod dock
Assign Control Dock for iPod to this source.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
Assign
: Assign iPod input.
None
: Do not assign iPod input.
• With the default settings, the Control Dock for iPod can be used
connected to the VCR (iPod) connector.
• Even if “iPod dock” is set to “Assign”, if the AVR-2808CI is not
connected to a Control Dock for iPod, the input source can be used
as the normal input source.
iPod
Make settings for “iPod” playback.
Repeat
Make settings for repeat mode.
[Selectable items]
All
: Repeat all songs.
One
: Repeat the current song.
OFF
: Cancel repeat mode.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
Digital In
Select digital input connector to assign to this source.
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
COAX1
: Assign COAXIAL 1 input connector.
COAX2
: Assign COAXIAL 2 input connector.
COAX3
: Assign COAXIAL 3 input connector.
OPT1
: Assign OPTICAL 1 input connector.
OPT2
: Assign OPTICAL 2 input connector.
OPT3
: Assign OPTICAL 3 input connector.
OPT4
: Assign OPTICAL 4 input connector.
None
: No digital input connector assigned.
Input
source
CD DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
COAX
3
COAX
1
None
COAX
2
OPT
1
OPT
3
OPT
2
OPT
4
Component In
Select component video input to assign to this source.
[Input source]
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Selectable items]
1-RCA
: Assign component video 1 input connector.
2-RCA
: Assign component video 2 input connector.
3-RCA
: Assign component video 3 input connector.
None
: No component video input connector assigned.
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
1-RCA 2-RCA 3-RCA None None None None