Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information TroubleshootingSetup
Subwoofer Att.
Attenuate subwoofer level when using EXT. IN mode.
[Selectable items]
ON
OFF
Set this to “ON” if the subwoofer channel level seems too high when
playing Super Audio CD.
Subwoofer
Turn subwoofer output on and off.
[Selectable items]
ON
OFF
Default
Resets the settings to the default values.
Tone Defeat
Turn tone adjustments off.
[Selectable items]
ON
OFF
The tone cannot be adjusted when in the DIRECT, PURE DIRECT and
HOME THX CINEMA mode.
Bass
Adjust bass for all channels together.
[Variable range]
–6dB ~ +6dB
Treble
Adjust treble for all channels together.
[Variable range]
–6dB ~ +6dB
“Bass” and “Treble” can be set when “Tone Defeat” is set to “OFF”.
s Tone
Adjust the tonal quality of the sound.
AFDM
Auto-select surround mode by source.
This function only works for software containing a special identification
signal.
If the software being played is recorded in Dolby Digital EX or DTS-ES,
it is played in 6.1-channels. If not, it is played in 5.1-channels.
[Selectable items]
ON
OFF
Example : Playing Dolby Digital software (with EX flag)
• When “AFDM” is set to “ON”, the surround mode is automatically
set to the DOLBY D + PLgx C mode.
• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and
“SB CH Out” to “MTRX ON”.
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when “AFDM” is set to
“ON”, set “SB CH Out” to “MTRX ON” or “PLgx CINEMA”.
SB CH Out (for Multi-channel sources)
Select playback mode for surround back channels.
[Selectable items]
NON MTRX
MTRX ON
PL
II
x CINEMA
z1
PL
II
x MUSIC
z2
ES MTRX
z3
ES DSCRT
z4
DSCRT ON
OFF
z1: This can be selected when “Surround Back” is set to “2spkrs”
at the GUI menu “Manual Setup” – “Speaker Setup” – “Speaker
Configuration” setting (vpage 30).
z2: This can be selected when “Surround Back” is set to “2spkrs”
or “1spkr” at the GUI menu “Manual Setup” – “Speaker Setup”
–“Speaker Configuration” setting.
z3: This can be selected when playing DTS sources.
z4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identification signal.
SB CH Out (for 2-channel sources)
Determine whether to use surround back speakers.
[Selectable items]
ON
OFF
Front
Adjust each front channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Center
Adjust each center channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Surround
Adjust each surround channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Surround Back
Adjust each surround back channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Subwoofer
Adjust each subwoofer channel tone.
[Selectable items]
Bass
[Variable range]
–6dB ~ +6dB
This can be set individually for the separate surround mode other than
PURE DIRECT, DIRECT and Home THX Cinema mode.
AVR5308CIEU_100_初校作成中.indd 52 2008/05/26 9:41:22