Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
a EXT. IN Setup
Make speaker settings for EXT. IN mode playback.
Audio Setup
Make settings for audio playback.
F Menu tree F
Manual Setup
Audio Setup
a EXT.IN Setup
s 2ch Direct/Stereo
d Downmix Option
f Auto Surround Mode
g Manual EQ
Surround Speaker
Select the surround speakers to use.
[Selectable items]
A
B
A+B
Subwoofer Level
Set the subwoofer level for playback.
Select according to the player in use.
[Selectable items]
0dB
+5dB
+10dB
+15dB
We recommend setting to “+15 dB”.
s 2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select “Custom”.
[Selectable items]
Basic
z
Custom
z: Use the same settings as in “Speaker Setup”.
Front
Select front speaker size.
[Selectable items]
Large
Small
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE–THX–
LFE+Main
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
THX
40Hz
60Hz
80Hz
90Hz
100Hz
110Hz
120Hz
150Hz
200Hz
250Hz
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
0.0ft ~ 60.0ft
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
0.0ft ~ 60.0ft
d Downmix Option
Set dynamic range for downmix playback of Dolby Digital sources.
[Selectable items]
ON
OFF
• Set this to “ON” if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
f Auto Surround Mode
Make setting for memorizing surround mode setting for each input
signal type.
[Selectable items]
ON
OFF
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
DSD, etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
This can be set when GUI menu “Speaker Setup“ – “Speaker
Confi guration“ – “Surround A“ and “Surround B“ are used (vpage
30).
Setup
AVR5308CIEU_100_初校作成中.indd 34 2008/05/26 9:40:34