Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
HDMI Setup
Make settings for HDMI video/audio output.
F Menu tree F
Manual Setup
HDMI Setup
a Color Space
s RGB Range
d Auto Lip Sync
f Audio
g Monitor Out
h HDMI Control
a Color Space
Make settings for output color space.
[Selectable items]
YCbCr
RGB
When connected to a monitor with a DVI-D connector (HDCP
compatible) using an HDMI/DVI converter cable, the signals are output
in RGB format, regardless of this setting.
s RGB Range
Make settings for RGB output range.
[Selectable items]
Normal
Enhanced
d Auto Lip Sync
Automatic compensation for timing shift in audio and video
output.
[Selectable items]
ON
OFF
f Audio
Select HDMI audio output device.
[Selectable items]
Amp
TV
g Monitor Out
Make settings for HDMI monitor output.
[Selectable items]
Auto (Dual)
Monitor 1
Monitor 2
Operating from the main remote control unit
Press the M.SEL button.
Auto (Dual) Monitor 1
Monitor 2
• When “Monitor Out” is set to “Auto (Dual)”, connections with
the MONITOR 1 or MONITOR 2 connectors are recognized
automatically.
• If both the MONITOR 1 and 2 connectors are connected and
“Resolution” is set to “Auto”(vpage 45), the signals are output
with a resolution compatible with both monitors.
• If “Resolution” is set to something other than “Auto”, check the
resolutions with which your monitor is compatible at GUI menu
“Information” – “HDMI Information” – “Monitor 1” and “Monitor 2”
and set accordingly (vpage 55).
When “YCbCr” is selected under “Color Space”, “RGB Range” will
have no effect.
h HDMI Control
Make settings for HDMI control function.
Control
Set HDMI control function ON/OFF.
[Selectable items]
ON
OFF
Control Monitor
Select the interlocking monitor with the HDMI control.
[Selectable items]
Monitor1
Monitor2
Power Off Control
Interlock power OFF with HDMI control.
[Selectable items]
ON
OFF
This can be set when “Control“ is set to “ON“.
• This can be set when “Control“ is set to “ON“.
• Please consult the operating instructions for each connected device
to check the settings.
GUI menu “HDMI Control” – “Control” is “ON”, the “Amp” and “TV”
will switch with the operation of any television not related to this
setting.
NOTE
• When the “Control” setting has been changed, always turn off the
power to the connecting devices afterwards and then turn back on.
• The HDMI control function does not work when the power to the
equipment is off.
• For details, see “HDMI Control Function” (vpage 73).
Setup
AVR5308CIEU_100_初校作成中.indd 33 2008/05/26 9:40:32