Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
Zone Setup
Make settings for audio playback in a multi-zone
system.
F Menu tree F
Manual Setup
Zone Setup
a ZONE2
s ZONE3
d OSD
a ZONE2
Make settings for audio playback in a ZONE2 system.
s ZONE3
Make settings for audio playback in a ZONE3 system.
Bass
Adjust low frequency range (bass).
[Variable range]
–10dB
~
0dB
~
+10dB
Treble
Adjust high frequency range (treble).
[Variable range]
–10dB
~
0dB
~
+10dB
HPF
When using speakers that cannot satisfactorily play low frequencies,
distortion of the bass sound can be reduced by setting “HPF” to
“ON”.
[Selectable items]
ON
OFF
Lch Level
Adjust the left channel output level.
[Variable range]
–12dB
~
0dB
~
+12dB
The “Lch Level“ and “Rch Level“ can be set when “Channel“ is set
to “Stereo“.
Setup
Rch Level
Adjust the right channel output level.
[Variable range]
–12dB
~
0dB
~
+12dB
Channel
Switch between stereo and mono output.
[Selectable items]
Stereo
Mono
When GUI menu “Manual Setup” – “Option Setup” – “Amp Assign” is
set to “ZONE (MONO)”, “Bi & ZONE (MONO)” or “ZONE2/3 (MONO)”,
the “Channel” setting is automatically set to “Mono”.
Volume Level
Adjust the main volume level.
[Selectable items]
Variable
–40dB
0dB
“Variable” is set when a power amplifi er is assigned to the ZONE2/
ZONE3 output channel at GUI menu “Manual Setup” – “Option Setup”
– “Amp Assign”.
Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
–20dB
–10dB
0dB
Power On Level
Defi ne the volume setting that is active when the power is turned on.
[Selectable items]
Last
– – –
–70dB ~ 18dB
Mute Level
Set the amount of attenuation when muting is on.
[Selectable items]
Full
–40dB
–20dB
This can be set when “Volume Level“ is set to “Variable“.
This can be set when “Volume Level“ is set to “Variable“.
d OSD
Set ZONE2 monitor as onscreen display Zone.
[Selectable items]
ZONE2
: Display only ZONE2 operations.
ZONE2/ZONE3
: Display ZONE2 and ZONE3 operations.
NOTE
• When connected to the component video output connectors, the
on-screen display is not displayed.
• On-screen display appears only on the ZONE2 monitor.It does not
appear on the ZONE3 monitor.
Option Setup
Make various other settings.
F Menu tree F
Manual Setup
Option Setup
a Amp Assign
s Volume Control
d Source Delete
f GUI
g Quick Select Name
h Trigger Out 1
j Trigger Out 2
k Trigger Out 3
l Trigger Out 4
A0 Transducer Setup
A1 Digital Out
A2 Remote ID
A3 2Way Remote
A4 Dimmer
A5 Setup Lock
A6 Maintenance Mode
A7 Firmware Update
A8 Add New Feature
AVR5308CIEU_100_初校作成中.indd 39 2008/05/26 9:40:50