Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information TroubleshootingSetup
g Video
Setting the video source.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD
HDP
TV/CBL
SAT
VCR
DVR-1
DVR-2
V.AUX
SOURCE
Video Convert
Automatically convert video input signal to monitor output format.
[Input source]
DVD
HDP
TV/CBL
SAT
VCR
DVR-1
DVR-2
V.AUX
[Selectable items]
ON
OFF
NOTE
• For optimum video performance, THX recommends that you set the
conversion mode to “OFF” to use video signals pass through system
without up conversion.
Example: The video input signals from the component video can
be enjoyed through the video output signals from the
component video.
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the conversion mode to “OFF”.
Operating from the main unit
Press the VIDEO SELECT button, then turn the SOURCE SELECT knob
until the desired picture appears.
b To cancel, press the main unit’s VIDEO SELECT button, then turn the
main unit’s SOURCE SELECT knob and select “SOURCE”.
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
i/p Scaler
Make settings for i/p scaler function.
[Selectable items]
A to H
A to H & H to H
OFF
• This can not be set when “Video Convert“ is set to “OFF”.
• The “A to H & H to H” can be set to the input source assigned to the
HDMI input connector.
• “A to H & H to H” setting:
•
Deep color (10 bit/12 bit) signals are converted into 8-bit signals.
•
The i/p scaler function does not work if xvYCC or computer’s
resolution signals are input.
Resolution
Make settings for resolution of HDMI video output signal.
[Selectable items]
Auto
480p/576p
1080i
720p
1080p
• This can be set when “i/p Scaler” is set to anything other than
“OFF”.
• When the “i/p Scaler” is set to “A to H & H to H”, the resolutions can
be setup to the analog video input signal and HDMI input signal.
This can be set when “i/p Scaler” is set to anything other than “OFF”.
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Selectable items]
Full
Normal
This can be set when “i/p Scaler” is set to anything other than “OFF”.
Progressive Mode
Select optimum progressive mode for video material.
[Selectable items]
Auto
Video1
Video2
Operating from the main unit
Press the SCALE button.
Auto
480p / 576p 1080i
1080p 720p
h Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 46, 47).
Input Mode
Set the input mode for this source.
[Input source]
TUNER
PHONO
(
iPod
)
[Selectable items]
Analog
EXT. IN
[Input source]
NET/USB
XM
HD Radio
[Selectable items]
Auto
EXT. IN
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR-1
DVR-2
V.AUX
[Selectable items]
Auto
HDMI
Digital
Analog
EXT. IN
• When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
Operating from the main unit or main remote
control unit
Press the INPUT MODE button on the main unit or the INPUT button
on the main remote control unit.
Auto HDMI Digital
AnalogEXT. IN
z1: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “HDMI” (vpage 46). Excluding CD.
z2: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “Digital” (vpage 46).
AVR5308CIEU_100_初校作成中.indd 45 2008/05/26 9:41:06