Filter
Top Products
Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting Specifi cations
Recording on an External Equipment
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
Press <ZONE2/3 / REC SELECT> until “ZONE2
Source”.
b The ZONE2 or ZONE3 selection mode changes each time you
press the button, and “ZONE2 Source” or “ZONE3 Source” is
displayed.
2
Turn <SOURCE SELECT> until “RECOUT Source” is
displayed.
The “ ” indicator lights.
n During ZONE2 Rec Select
ZONE2 Source ZONE2 TUNER ZONE2 SIRIUS····
RECOUT SIRIUS RECOUT TUNER RECOUT Source······
3
Turn <SOURCE SELECT> to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
51).
5
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.
Other Operations
Other Operations and Functions
Playing Super Audio CD
1
Assign the HDMI input connector at the “HDMI In”
setting (vpage 38).
2
Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” indicator lights on the display.
3
Press INPUT MODE to select “AUTO” (vpage 37).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 40 ~ 42).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are fi rst converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi-channel signals in the DIRECT
mode.
INPUT MODE
SOURCE SELECT
<ZONE 2/3 / REC SELECT>
SOURCE SELECT
INPUT MODE
[ AMP]
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Surround mode
Surround mode
Playback