Denon AVR-2807 Stereo Receiver User Manual


 
41
Advanced Operation Advanced Operation
ENGLISH
ENGLISH
With “ZONE2 SOURCE” displayed, turn
<
FUNCTION
>
to select the source you want to
output appears on the display.
Outputting a program source to amplifier,
etc., in the ZONE2 room
(ZONE2 SELECT mode)
The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDR/TAPE recording output
terminals.
Digital signals are not output from the ZONE2 audio output
terminals.
About the MULTI ZONE connections ( page 40).
Press
<
ZONE2/REC SELECT
>
to display the
“ZONE2 SOURCE” on the display.
The “ ” indicator lights.
Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
RECOUT
ZONE2
Remote control unit operations during multi-
source playback
Press [ZONE2] to select “ZONE2”.
Press [ZONE2 ON] to turn on the zone power.
Press [ZONE2 OFF] to turn off the zone power.
Select the input source you wish to output.
When the function is set to TUNER, the preset channel can
be selected using [CHANNEL].
The volume of the outputs of the different zones
can be adjusted with [VOLUME].
The ZONE2 volume can be adjusted only when “ZONE2” is
selected at “Power Amp Assign” in the “System Setup
Menu” ( page 54).
Default volume setting:
ZONE2 : –40 dB
The zone volume can be adjusted within the range of –70 to
18 dB.
1
2
3
4
1
2
3
<FUNCTION>
<ZONE2/REC SELECT>
[ZONE2 ON]
[ZONE2 OFF]
[FUNCTION]
(ZONE2)
[VOLUME]
[ZONE1 (MAIN) ON/OFF]
[CHANNEL]
[ZONE2]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
When using ZONE2, it is possible to turn the power for the
MAIN ZONE (main zone) only on or off by pressing [ZONE1
(MAIN) ON/OFF].