Denon AVR-2807 Stereo Receiver User Manual


 
Advanced Operation Advanced Operation
39
ENGLISH
ENGLISH
Playing the iPod
®
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
(iPod screen)
With the iPod, non-copyrighted contents and contents that
may be legally reproduced or played may be reproduced and
played by individuals for their personal use. Violating
copyrights is prohibited by law.
NOTE:
DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the AVR-2807.
Some of the functions may not operate, depending on the
type of iPod and the software version.
Listening to music
Press
DD HH
to select the music file, then press
ENTER or
GG
.
Press
FF
to return to the music menu screen.
Press ENTER or
GG
.
Playback starts.
Manual search:
Press and hold in
DD HH
during playback.
DD
: Fast reverse
HH
: Fast forward
Track search:
Press
DD HH
during playback.
DD
: Move to beginning of previous track
HH
: Move to beginning of next track
Repeat play:
Press [MODE].
The mode switches as follows each time [MODE] is pressed.
RPT One: Single track repeat
RPT All : All track repeat
Shuffle play:
Press [MEMORY].
The mode switches as follows each time [MEMORY] is
pressed.
SFL Songs : Single track shuffle
SFL Albums: Album shuffle
Pause:
Press ENTER during playback.
Press again to resume.
Stop:
Press ENTER for at least 2 seconds during playback.
The mode switches between the Browse mode and the
Remote mode if [MODE] is pressed for at least 2 seconds.
In the Remote mode, only
DD HH FFGG
and ENTER can be used.
1
2
•When
<
STATUS
>
is pressed during playback, the front panel
display switches between the title name, artist name and
album name.
Depending on the iPod’s software version, it may not be
possible to operate the iPod from the AVR-2807. Use the latest
version of the software. Information on the latest version of the
software can be obtained on the Apple Computer website.
•If you do not want the on screen display to be displayed while
playing the iPod, set “Function/Mode Status” at “Setting the
On Screen Display” to “OFF” ( page 52).
•With the AVR-2807 it is possible to display folder names and file
names on the screen like titles. The AVR-2807 can display up to
64 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Press [MODE] for at least 2 seconds to switch
from the Browse mode to the Remote mode.
“Remote iPod” is displayed on the AVR-2807’s display.
Watching the iPod’s screen, press
DD HH
to select
“Photos” or “Video”, then press ENTER or
GG
.
The iPod’s photo and video data are displayed on the
monitor.
Use this procedure to view photo and video data stored on the
iPod on a monitor.
Disconnecting the iPod
Press
<
ON/STANDBY
>
and set the AVR-2807’s
power to the standby mode.
The iPod can be disconnected after switching to a function
other than the one to which the iPod input is assigned.
1
2
Connect the AVR-2807 and iPod using the
DENON original Dock ( page 20).
1
Use FUNCTION to select the function assigned in
step 2.
3
Assign the input terminal at “Setting the iPod
Assignment” ( page 47).
2
The optional standard iPod Dock is DENON ASD-1R sold
separately.
The music recorded on the iPod can be played when using a
DENON original Dock (ASD-1R). The iPod can be controlled using
the buttons on the main unit and the remote control unit.
•To output photo or video data recorded on the iPod to the
monitor, the iPod’s “TV Out” setting (under “Video Settings”)
must be set to “ON”.
For details, refer to the iPod’s operating instructions.