Denon AVR-2807 Stereo Receiver User Manual


 
33
Basic Operation Basic Operation
ENGLISH
ENGLISH
Select “Default Yes” and press
FF
to reset all the settings.
Press
DD HH
to select the item, then press
FF GG
to
set.
Press ENTER or SURROUND PARAMETER.
Selecting the DSP surround simulation
Press SURROUND PARAMETER.
Press [DSP SIMULATION].
7CH STEREO WIDE SCREEN SUPER STADIUM
JAZZ CLUB
ROCK ARENA
MATRIX
VIDEO GAME CLASSIC CONCERTMONO MOVIE
VIRTUAL
The 7CH STEREO mode can be selected directly by
pressing <7CH STEREO>.
1
2
3
4
EFFECT: (WIDE SCREEN mode only)
Effect signals with the multi-surround speaker effects are
played. When set to “OFF”, the SL/ SR channels are played
from the SBL/ SBR channels, respectively.
LEVEL: (WIDE SCREEN mode only)
Adjust the strength of effect signals “1” to “15”.
ROOM SIZE:
Adjust the imaginary size of the recreated sound field space.
(Does not express size of room in which played.)
There are 5 parameters: “small”, “med.s”, “medium”,
“med.l” and “large”.
SB CH OUT
ON:
Surround back channel played.
OFF:
Surround back channel not played.
This operation can also be performed using
<
SURROUND
BACK
>
.
EFFECT LEVEL:
Adjust the strength of the surround effect.
DELAY TIME: (MATRIX mode only)
Adjust the delay time between “0 ms” and “300 ms”.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
D
H
F
G
<SURROUND BACK>
<7CH STEREO>
DSP
SIMULATION
SURROUND
PARAMETER
ENTER
SURROUND
PARAMETER
ENTER
D
H
F
G
DSP SIMULATION