Denon AVR-2807 Stereo Receiver User Manual


 
22
Connecting Other Sources Connecting Other Sources
ENGLISH
ENGLISH
Use these terminals if you wish to connect external power amplifier(s) to increase the power of
the front, center, surround and surround back sound channels, or for connection to powered
loudspeakers.
When using only one surround back speaker, connect it to the left channel.
Connecting the PRE OUT terminals
Power amplifier
R
SURROUND
BACK
L
R
SURROUND
L
R
FRONT
L
CENTER
SUB-
WOOFER
R
L
R
L
B
A
B
A
R
L
R
L
R
L
R
L
A
Connecting the power supply cord
AC 230 V, 50 Hz
AC outlet
(wall)
Power supply cord
(Supplied)
NOTE:
Insert the plugs securely. Incomplete
connections will result in the generation of
noise.
Only use the AC OUTLET for audio
equipment. Never use it for hair driers,
monitors or other electrical appliances.
AC OUTLET
SWITCHED (total capacity – 100 W (0.43 A))
The power to the outlet is turned on and
off in conjunction with the POWER switch
on the main unit, and when the power is
switched between on and standby from
the remote control unit.
No power is supplied from this outlet
when this unit’s power is at standby. Never
connect equipment whose total power
consumption exceeds 100 W (0.43 A).