Filter
Top Products
112
Video
Picture Adjust
Default settings are underlined.
Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image
quality on your TV, and use this menu only when you want to make fine adjustments.
•This item can be set when the input source is
CBL/SAT
DVD
Blu-ray
GAME
AUX
MEDIA PLAYER
CD
NETWORK
TV AUDIO
.
•With input sources other than the ones above, this item can be set when “Video Source” is selected. In
this case, the original input source settings are called out.
•Can be set when the “Video Conversion” setting (vpage113) is “On”.
•“Blu-ray”, “GAME”, “CD” or “TV AUDIO” can be set when “HDMI” or “COMP” (vpage117) has
been assigned.
Setting items Setting details
Contrast
Adjust picture contrast.
–6 – +6 (0)
Brightness
Adjust picture brightness.
0 – +12
Saturation
Adjust picture chroma level
(saturation).
–6 – +6 (0)
Hue
Adjust green and red
balance.
–6 – +6 (0)
Noise Reduction
Reduce overall picture
noise.
Off / Low / Medium / High
Enhancer
Emphasize picture contours.
0 – +12
•“Picture Adjust” can not be set when component video and video signals are output.
•“Picture Adjust” can not be set when 4K signals are input.
HDMI Setup
Default settings are underlined.
Make settings for HDMI video/audio output.
Setting items Setting details
Auto Lip Sync
Make automatic
compensation for timing
shift in audio and video
output.
On : Compensated.
Off : Not compensated.
HDMI Audio Out
Select HDMI audio output
device.
AVR : Play back through speakers connected to the unit.
TV : Play back through TV connected to the unit.
•The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors
cannot be output from the HDMI output connector.
•When the HDMI control function is activated, priority is given to the TV
audio setting (vpage91 “HDMI control function”).
Video Output
Make settings for HDMI
monitor output.
Auto (Dual) : The presence of a TV connected to the HDMI MONITOR
1 or HDMI MONITOR 2 connector is detected automatically, and that TV
connection is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
2 connector.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
1 connector.
•If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” (vpage114) is set to “Auto”, the signals
are output with a resolution compatible with both TV.
•With “Resolution” (vpage 114) not set to “Auto”, check whether
the TV you are using is compatible with the resolution under “Video” –
“Monitor 1” and “Monitor 2” (vpage133).
NOTE
Depending on the monitor you have connected, the display may not
be correct when you set to “Auto (Dual)”. In such a case, set to either
“Monitor 1” or “Monitor 2”.
Basic version
Advanced version
Informations
Advanced version
v See overleaf
DVD