Filter
Top Products
99
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Surround Parameter Adjusts surround sound parameters.
105
Tone Adjusts the tonal quality of the sound.
107
Dialogue Level Sets the output level to clarify the dialogue
output from the center channel.
107
Subwoofer Level Sets the subwoofer on/off and its output level.
107
Restorer Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
107
Audio Delay Compensates for incorrect timing between video
and audio.
108
Volume Set the MAIN ZONE (room where the unit is
located) volume setting.
108
Audyssey Makes Audyssey MultEQ
®
XT, Audyssey
Dynamic EQ
®
and Audyssey Dynamic Volume
®
settings.
108
Graphic EQ Uses the graphic equalizer to adjust the tone of
each speaker.
110
Video
Picture Adjust Adjusts the picture quality.
112
HDMI Setup Makes settings for HDMI video/audio output.
112
Output Settings Makes screen-related settings.
113
Volume Display Sets where to display the master volume level.
114
Info Display Displays status of operation temporarily when
the sound mode is changed, or input source is
switched. You can set whether or not to show
each of these status displays.
115
Audio Display Sets how long each menu is displayed when the
input source is “NETWORK”, “iPod/USB”, or
“FM”.
115
TV Format Set the video signal format to be output for the
TV you are using.
115
Setting items Detailed items Description Page
Inputs
Input Assign Changes input connector assignment.
117
Source Rename Changes the display name for this source.
118
Hide Sources Remove from the display input sources that are
not used.
119
Source Level Adjusts the playback level of the audio input.
119
Input Select Sets the audio input mode and decode mode.
119
Video Source Video of another input source is played back
combined with the playing audio.
120
Speakers
Audyssey
®
Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
26,89
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey
®
Setup.
122
Network
Information Display network information.
127
IP Control Set the network function on/off during standby.
127
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
127
Settings Make settings for wired LAN.
128
Last.fm Display Set whether or not to display Last.fm item on the
menu.
129
Maintenance Mode Use when receiving maintenance from a DENON
service engineer or custom installer.
129
Basic version
Advanced version
Informations
Advanced version
v See overleaf
DVD