Filter
Top Products
Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
f GUI
AVC-A1HD
h GUI
AVP-A1HD
Make GUI related settings.
Screensaver
Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
[Selectable items]
ON
OFF
Wall Paper
Change the GUI background.
[Selectable items]
Picture
Black
Gray
Blue
Format
Select the video output signal format to match the monitor.
[Selectable items]
PAL
NTSC
NOTE
When a format other than the video format of the connected monitor
is set, the picture will not be displayed properly. Use the procedure
described below to change the video format.
When “Screensaver” is set to “ON”, the screensaver is activated if no
operation is performed for about 3 minutes.
When uio p, ENTER or MENU button is pressed, the screen saver is
cleared and the corresponding operation is performed.
Master Volume
Master volume display during adjustment.
[Selectable items]
Bottom
Top
OFF
NET/USB, iPod
This sets the time the on-screen display is displayed when an operation
is performed.
[Selectable items]
Always
30s
10s
OFF
Text
Text information display.
[Selectable items]
ON
OFF
Operating from the main unit
b The GUI menu is not displayed when performing this setting.
q Press and hold the AUDIO DELAY and RETURN buttons for at least 3
seconds.
“Video Format” appears on the display.
w Use the o p button to make the setting.
e Press the ENTER, MENU or RETURN button to complete the
setting.
g Quick Select Name
AVC-A1HD
j Quick Select Name
AVP-A1HD
Change “Quick Select” display name.
Up to 16 characters can be input.
[Input characters]
A ~ Z
a ~ z
0 ~ 9
! # % & ’ ( ) * + , - . / : ; < = “ > ? @ [ \ ] (space)
When the master volume display is hard to see when superimposed
on movie subtitles, set to “Top”.