Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
s Option
Make direct mode settings.
Direct Mode
Select MultEQ
®
XT 32 use for DIRECT or PURE DIRECT mode.
[Selectable items]
ON
OFF
d Parameter Check
Check Auto Setup measurement results.
This is displayed after the Auto Setup procedure is
completed.
[Selectable items]
Spkr Config Check
Distance Check
Ch. Level Check
Crossover Check
EQ Check
Restore
• If “EQ Check” is selected, press ui to select equalizing curve
(“Audyssey” or “Audyssey Flat”) to be checked, and then press
ENTER or p.
Use ui to switch the display between the different speakers.
• If “Restore” is selected, all settings are returned to the Auto Setup
results (values initially calculated by MultEQ
®
XT 32) even if each
setting was changed manually.
⇩
PARAMETER CHECK
Restore
Spkr Config Check
Distance Check
Ch.Level Check
Crossover Check
EQ Check
Yes
No
Restore auto setup measurement result
RESTORE
Restore Yes
No
Restore auto setup measurement result
Enter