Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
RETURN
ENTER
uiop
1
Configuring Various Settings
Use ui to select the item you want to set, and then
press ENTER.
The menu screen of the selected setting is displayed.
AUTO SETUP
1 2 3 4 5 6
Amp Assign
RETURN
Auto Setup Start
Channel Select
STEP1 Preparation
Connect the speakers and place them according
to the recommendations in the manual.
Set the following items
if necessary.
Start Auto Setup
Enter Cancel
AUTO SETUP
1 2 3 4 5 6
XLR Out Polarity
Pre-out Assign
RETURN
Auto Setup Start
Channel Select
STEP1 Preparation
Connect the speakers and place them according
to the recommendations in the manual.
Set the following items
if necessary.
Start Auto Setup
Enter Cancel
GSetup screen
AVC-A1HD
H
GSetup screen
AVP-A1HD
H
b For details of the items that can be set, see page 28 ~ 30.
2
Press uio p to set.
3
Press RETURN to return to the previous screen.
4
Start Auto Setup
Use ui to select “Auto Setup Start” and then press
ENTER.
Proceed to “STEP2 Detection & Measurement (main)” (vpage
16).
uio p
RETURN
ENTER
(Main remote control unit) (Sub remote control unit)
ENTER
uio p
RETURN