Filter
Top Products
Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
Make detailed settings for various parameters.
Speaker Setup
Use this procedure to set the speakers manually
or if you wish to change the settings made with
the Auto Setup procedure.
F Menu tree F
Manual Setup
Speaker Setup
a Speaker Configuration
s Subwoofer Setup
d Distance
f Channel Level
g Crossover Frequency
h THX Audio Setup
Manual Setup
Front
Select front speaker size.
[Selectable items]
Large
Small
a Speaker Configuration
Select speaker configuration and size.
(bass reproduction capability)
Center
Select center speaker use and size.
[Selectable items]
Large
Small
None
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
Surround
Select surround speakers use and size.
[Selectable items]
Large
Small
None
Surround Back
Select surround back speaker use and size.
[Selectable items]
Large
Small
None
2spkrs
1spkr
• Select “Large” or “Small” not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at “Crossover Frequency” (vpage
25).
• When “Front” is set to “Small”, “Subwoofer” is automatically set to
“Yes”.
• If “Subwoofer” is set to “No”, “Front” is automatically set to
“Large”.
• If “Surround” is set to “None”, “Surround Back”, “Front Height” and
“Front Wide” are automatically set to “None”.
• When using just one surround back speaker, connect it to the left
channel (SBL).
• To take full advantage of the performance of the Home THX certified
speaker systems, set the front, center and surround speaker size
parameters to “Small” and the subwoofer to “Yes”.
• “Front Height” can be set when the “Option Setup” – “Amp Assign”
– “Assign Mode” setting (vpage 28) in the GUI menu is “Front
Height”, or the “Option Setup” – “Amp Assign” – “Extension
Channel” setting (vpage 28, 29) is set to “Front Height”.
• “Front Wide” can be set when the “Option Setup” – “Amp Assign”
– “Assign Mode” setting (vpage 28) in the GUI menu is “Front
Wide”, or the “Option Setup” – “Amp Assign” – “Extension Channel”
setting (vpage 28, 29) is set to “Front Wide”.
Large
: Use a large speaker that can adequately play back low
frequencies.
Small
: Use a small speaker that has inadequate playback capacity
for low frequencies.
Front Height
Select front height speaker use and size.
[Selectable items]
Large
Small
None
Front Wide
Select front wide speaker use and size.
[Selectable items]
Large
Small
None
When this unit is upgraded, the “Speaker Setup”
contents are changed.
When configuring the “Speaker Setup” settings,
refer to this version of the Owner's Manual
instead of the “Original version”.