Filter
Top Products
0
Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
ENTER
ui
Finish
Auto Setup is complete.
1
Unplug the setup microphone from the unit’s SETUP
MIC jack.
2
Set Audyssey Dynamic Volume
®
.
AUTO SETUP
1 2 3 4 5 6
Yes
No
Finish
Storing complete.
Auto Setup is now finished.
Please unplug microphone.
Turn on Dynamic Volume ?
Turn Dynamic Volume off and exit Auto Setup
Exit
b This feature adjusts the output volume to the optimal level while
constantly monitoring the level of the audio input to the unit.
Optimal volume control is performed automatically without any
loss in the dynamism and clarity of the sound when, for example,
the volume suddenly increases for commercials shown during
television programs.
n When turning Dynamic Volume
®
on
Use u to select “Yes”, and then press ENTER.
The unit automatically enters “Evening” mode.
n When turning Dynamic Volume
®
off
Use i to select “No”, and then press ENTER.
NOTE
• After performing Auto Setup, do not change the speaker connections
or subwoofer volume. In event of a change, perform Auto Setup
again.
• After performing Auto Setup with two or three subwoofers, do not
change the channel distances and levels of any of the subwoofers.
ENTER
u
i
(Main remote control unit) (Sub remote control unit)
i
ENTER
u