Filter
Top Products
Application Guide
®
62
Section 7
DriveRack
™
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack™.
2. Connect the outputs of the DriveRack™ and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4. Make connections between the Zone Controllers (see Section 6.2) and the 260.
Software
1. Select a program (Factory: 2x2 w/ 4 Zones) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Save multiple copies of this program to be recalled by the ZC-3 Controller.
4. Adjust the individual parameters for each of the programs by pressing the Processing
Module buttons.
5. Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and program
its output level boost and cut parameters.
6. Using the Utility Menu, select the ID for the ZC-3 Zone Controller and select the programs
that the ZC-3 will load from each of its positions.
7.3 Stereo with Four Aux Zones
DriveRack™ User Manual
JBL AE Series
AC2215/64
2 435
JBL Control 26C
Ceiling Speaker
Zone A Zone B
JBL Control 26C
Ceiling Speaker
JBL Control 26C
Ceiling Speaker
Zone C Zone D
JBL Control 26C
Ceiling Speaker
dbx ZC-1 dbx ZC-2 dbx ZC-2
dbx ZC-3
dbx ZC-1
Left
Right
MA-5002VZ