Filter
Top Products
Utilities/Meters
®
42
Section 5
DriveRack
™
®
DriveRack™ User Manual
• Pressing the DATA wheel will give you the option of selecting the range of the boost and
the cut of the potentiometer on the ZC-2 or ZC-2. Once the boost and cut range has been
selected, pressing (select) and rotating the DATA wheel will let you select any one of the six
outputs to be affected by the boost and cut control.
• Selecting ZC-3 gives the ability to assign switches A-D to call up any preset in the 260. Once
ZC-3 has been selected, the display will appear something like this:
• Pressing and then rotating the DATA wheel will allow you to first select A-D, and then assign
any program number to the aforementioned button. No change means that no program will
be loaded for that selection.
• Selecting ZC-4 gives the ability to assign any latching switch combination to the 260. Once
ZC-4 has been selected, the display will appear something like this:
• Pressing and then rotating the DATA wheel will allow you to first select any latch switch com-
bination, and then assign it to any program number., and then assign any program number
to the aforementioned button.
For more information regarding Zone Controllers, please see section 6.2.
To protect all detailed parameter editing and configuration modification settings of your
DriveRack unit, the Utility menu of the DriveRack system includes a complete security system
set-up. This security system allows you to set security access to unit features including: Program
List, Store, Mutes, Inputs, Pre EQ, Inserts, Pre Delay, Crossover Post, EQ, Dynamics, Post Delay,
Outputs, RTA and Program Lock, with security levels that vary from low to high. By providing
5.1.4 -Page 4 -6 - Security
Panel 1 ZC-4
Switch
No Change
123 4
Panel 1 ZC-3
Select A
No Change
Panel 1 ZC-2
Boost 0dB Cut 0dB
Output
1 3 5
2 4 6