Filter
Top Products
9) Measure the driver's V(as).
Once you have measured the driver's free air parameters the "Measure V(as)" button becomes enabled.
Select one of the three methods to measure the V(as). Then press the “Measure V(as)” button to start
the measurement procedure. The three V(as) measurement methods are:
Test Box Method
Added Mass Method
Specified SPL Method
10) After measuring the driver you can:
•
Save the data to one of 20 project memories.
•
Save your work to a WT3 test project file (file type .wt3) which includes your test setup
and all 20 memories.
•
Export the impedance and phase data in either .txt or .zma formats. Parameters are
included in the text notes.
•
Overlay plots of various measured impedances from the 20 memories for detailed
comparison.
•
Print a report showing the impedance plots and parameters of the displayed memories
(see below).