Filter
Top Products
File Menu
The commands under the File menu are as follows:
ew (Ctrl+)
Clears all current data to create a new empty WT3 project file. Each project file holds up to 20
measurements in individual memories. The memories can be displayed or hidden by clicking the
corresponding memory buttons on the toolbar.
Open… (Ctrl+O)
Opens a WT3 project file (.wt3) which you have previously saved to disc. Note that WT3 can be
launched and a project .wt3 file opened from the desktop by double-clicking on the file icon. Project
files can also be opened by dragging and dropping them onto the open application window.
Save (Ctrl+S)
Saves a WT3 project file to disc with the .wt3 filename extension. A single .wt3 file can contain up to
20 memories of data and notes in addition to the immediate data and notes on the Workbench. Project
files also contain complete test setup information so that opening a saved project file restores the test
setup that was in place when the project file was saved. This includes such settings as the Impedance
and Frequency plot limits. In addition, a large number of measurement setup variables are saved within
each project file.
Save As…
Brings up a save as file dialog which allows you to save the current project file under a different name
or to a different location on your system.