Filter
Top Products
31
ENGLISH
For example, if you use the balance control frequently, you may want to
consider programming one of the
Fkeys
to take you straight to that screen.
Doing so will save you having to access the control menu, followed by pressing
the
balance
button
(which might be hard to see from across the room)
.
The
remote Fkey
menu has four buttons, one each for the four
remote Fkey menu has four buttons, one each for the four remote Fkey
Fkeys
on your
remote control. Pressing any of these buttons on the LCD touchscreen takes you
to a subordinate, scrolling list of possible functions for that particular
Fkey
.
Selecting the one you want is as simple as scrolling through the list (by touching
either the up or down arrows on the right), and then touching the speci–c
function in the list that you want that
Fkey
to perform.
Fkey to perform.Fkey
cautionary note on Fkey use
Note that all Classé remote controls provide these same four
Fkeys
, so that you
need not worry about which remote you happen to pick up. Thus
F1
on the
preampli–er»s remote control sends the same infrared signal as
F1
on the CD
player»s remote control.
While this is intended to minimize confusion amongst different remotes (since
this aspect of them will all perform identically), you should take care when
assigning different functions on different components to the same
Fkey
. Doing
so would result in two components doing two different things at once, in
response to a single press of a button on the remote control. This can sometimes
be useful. As an example,
F1
could set the preampli–er to the
CD
input, and
also set the CD player to
Play
, both from the press of a single
Fkey
.