Filter
Top Products
20
ENGLISH
• The
Bal
(balance) key takes you directly to the
balance
screen
in the menu system; once there, you can use the navigation keys
on the remote to select either the
left
or
left or left
right
buttons on the
right buttons on the right
LCD touchscreen, depending on which way you wish to move
the balance. Adjust the relative left-right balance of the system
by using the
Enter
key on the remote to ≈press∆ the appropriate
Enter key on the remote to ≈press∆ the appropriate Enter
button on the display.
•
Up/Down/Left/Right
keys allow you to move within a
Up/Down/Left/Right keys allow you to move within a Up/Down/Left/Right
particular menu screen, changing the highlighted item up/down/
left/right as you like, from the comfort of your listening position.
• The
Enter
key allows you to select the highlighted item, having
Enter key allows you to select the highlighted item, having Enter
the same effect as if you had pressed the button on the LCD
touchscreen.
• The
Tape
key is not a navigation key, per se, but allows you
to easily toggle between listening to the selected source and
listening to the output of your recording device. If you have
a recording device (such as a three-head tape deck) which can
play back a recording while it is being made, you will be able
to compare the original signal to the recording while you are
making it.
4 Fkey Controls
The CP-700 remote control can also control user-de–ned functions as
well. The
F1/F2/F3/F4
keys are available for controlling aspects of the
CP-700 not covered by the other buttons on the remote control.
You are able to choose what the CP-700 should do in response to receiving
the infrared signal that a particular
Fkey
has been pressed. The list of
Fkey has been pressed. The list of Fkey
possible functions is quite extensive, and is found in the menu system (see
the next section in this manual, entitled
The Menu System
).
The Menu System). The Menu System
Note: The Fkeys on all Classé remote controls issue the same
Note: The Fkeys on all Classé remote controls issue the same
infrared commands. This saves you from having to be
sure you have picked up the proper remote, since all your
Classé remotes will perform the same function for each
Fkey.