Filter
Top Products
17
ENGLISH
8 Classé CAN Bus Control Ports
These
RJ-45
connectors are reserved for future control and
communication applications using Classé Audio»s implementation of the
Controller Area Network (CAN) Bus speci–cation.
9 IR Input and Output
Your Classé preampli–er includes two 1/8th-inch
mini mono-jacks
in
order to support the infrared (IR) remote controls that are ubiquitous
today. Infrared commands exist (for example) for
toggling
the preampli–er
toggling the preampli–er toggling
between
operate
and
operate and operate
standby
, in addition to discrete command codes
standby, in addition to discrete command codes standby
for either
operate
or
operate or operate
standby
. These codes may be used in ≈macros∆ for
sophisticated remote control systems, facilitating the control of the
preampli–er in the larger context of a complete system.
The list of commands available is quite extensive, enabling even complex
macros
(chains of commands strung together) to operate —awlessly. If this
macros (chains of commands strung together) to operate —awlessly. If this macros
capability is of interest to you, we strongly recommend discussing it with
your authorized Classé dealer.
Note that
IR Input
and
IR Input and IR Input
Output
is a bit of a misnomer: the input and
Output is a bit of a misnomer: the input and Output
output of these plugs is
electrical
in nature, not infrared. They are used
electrical in nature, not infrared. They are used electrical
with standard IR receivers, distribution ampli–ers, and emitters (available
from your dealer) to translate the remote»s IR signal to an electrical signal
and
vice versa
. The big advantages here include being able to easily route
the signals anywhere they might need to go and the reliability of a solid
electrical connection.
Since an IR distribution system such as your dealer may design for you
usually must control many products, your preampli–er includes both an
IR input
(for the control of this product) and an
IR input (for the control of this product) and an IR input
IR output
(so as to
IR output (so as to IR output
pass along the same signal to the next product). This allows you to ≈daisy
chain∆ your control wires from one product to the next.
The preampli–er is designed to respond to IR commands of 5 Volts DC,
with the tip of the mini-plug de–ned to be positive relative to the shank of
the plug.