Filter
Top Products
2
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
NOTICE
All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to
inform you that all Classé components have been of–cially approved for the European Community (CE) mark.
All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to
inform you that all Classé components have been of–cially approved for the European Community (CE) mark.
All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to
This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world.
The CE mark certi–es that your purchase meets or exceeds all European Community requirements for unit-to-unit
This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world.
The CE mark certi–es that your purchase meets or exceeds all European Community requirements for unit-to-unit
This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world.
consistency and consumer safety.
The CE mark certi–es that your purchase meets or exceeds all European Community requirements for unit-to-unit
consistency and consumer safety.
The CE mark certi–es that your purchase meets or exceeds all European Community requirements for unit-to-unit
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio
or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio
correct the interference by one or more of the following measures:
or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to
correct the interference by one or more of the following measures:
or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and the receiver;
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and the receiver;
• Reorient or relocate the receiving antenna;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Increase the separation between the equipment and the receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Increase the separation between the equipment and the receiver;
• Consult the dealer or an experienced radio/TV technician for help.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
CAUTION: Changes or modi–cations to this equipment not expressly approved by the manufacturer could void the
user»s authority to operate the equipment.
CAUTION: Changes or modi–cations to this equipment not expressly approved by the manufacturer could void the
user»s authority to operate the equipment.
CAUTION: Changes or modi–cations to this equipment not expressly approved by the manufacturer could void the
The information contained in the manual is subject to change without notice. The most current version of this manual
will be posted on our web site at http://www.classeaudio.com.
The information contained in the manual is subject to change without notice. The most current version of this manual
will be posted on our web site at http://www.classeaudio.com.
The information contained in the manual is subject to change without notice. The most current version of this manual
The lightning —ash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated dangerous voltage within the product»s enclosure that
may be of suf–cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
Marking by the ≈CE∆ symbol (shown left) indicates compliance of this device with the
EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the
European Community.
Classe products are designed to comply with international directives on the Restriction
of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal
of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol
indicates compliance and that the products must be appropriately recycled or processed in
accordance with these directives.