Filter
Top Products
28
ENGLISH
phono gain
The
phono gain
menu is only active if the optional
phono module
is installed;
otherwise it is grayed out. When it is installed, the CP-700 will automatically
recognize it, rename the
line 1
input to
phono
, and activate the input on the
main menu.
Setting the phono gain is simple enough: choose
low gain
for most moving
low gain for most moving low gain
magnet cartridges, and for high output moving coil cartridges; choose
high
gain
for low output moving coil cartridges. Your Classé dealer can assist you
gain for low output moving coil cartridges. Your Classé dealer can assist you gain
in determining what type of cartridge you have, and which setting is most
appropriate.
triggers
Each of the CP-700»s
trigger outputs
may be programmed as to its ≈logic level,∆
which is to say, whether its voltage is
low
(essentially 0V), or
low (essentially 0V), or low
high
(approximately
high (approximately high
12V) when the trigger is activated. The ability to change the logic level of a
trigger»s ≈on∆ state can solve installation-speci–c problems that otherwise require
external devices that add to both the cost and complexity of your system.
If this seems an obscure point, that»s okay. It is a feature designed to solve
problems you may not even have, but your installation professional appreciates
being able to easily solve such problems when they occur.
teach IR
The CP-700 provides discrete infrared (IR) command codes for all its functions,
a list that extends far beyond what is required by normal remote controls.
However, many of these functions are critical if you plan to create a customized
remote control with macros that take command of your entire system. Without
these discrete codes, many of the macros you might want to create will simply
not work reliably.
The
teach IR
screen provides a scrolling list of all the available IR codes in
teach IR screen provides a scrolling list of all the available IR codes in teach IR
the CP-700. By scrolling to the command you need to learn into your macro-
capable remote, and then pressing the
send IR code
button, the CP-700 will
send the appropriate command code out its front panel–where it can be learned
by your third-party remote control.
For more information on such control systems, we recommend you speak with
your authorized Classé dealer.