Filter
Top Products
29
ENGLISH
display setup
This button brings up the
display setup
menu. It allows you to con–gure the
CP-700»s LCD screen
brightness
, the display
brightness, the display brightness
timeout
, and the
timeout, and the timeout
language
used in
language used in language
the touchscreen and menu system.
brightness
The
brightness
setting of the CP-700 has three possible values:
low, medium,
and
high
. Select the appropriate setting based on the level of ambient light
typically found in your listening room while using the system. A
high
brightness
high brightness high
setting usually works best in brightly-lit rooms; you may –nd that a lower setting
is less visually intrusive under more subdued lighting conditions.
timeout
If you prefer listening to music in a dimly-lit or darkened room, you may –nd
even the
low
brightness setting of the display somewhat distracting. If so, you
low brightness setting of the display somewhat distracting. If so, you low
can vary the
timeout
of the backlighting so as to turn it off entirely after a
timeout of the backlighting so as to turn it off entirely after a timeout
period of inactivity you select.
In this context, activity refers to any use of the user interface. This includes hard
buttons, the LCD touchscreen, and the remote control.
For example, if you reduce the timeout to its minimum setting, the backlighting
will illuminate the display as soon as you interact with any of the CP-700
controls, and stay on for only three seconds – just long enough for you to check
on something. If you continue to use any of the controls (at least once every
three seconds), the display will remain lit. It will then extinguish itself after three
seconds of inactivity on your part.