Filter
Top Products
Programming
5. Select a level and press ENT to save the selection (PROG LED will
blink when selection has been entered).
Important: You must press ENT after every change you make
in order to save the new setting. This is true for all program-
ming procedures.
6. Repeat Step 3, 4 and 5 to assign any other inputs to the amplifier chan-
nel. Note that priority level numbers become unavailable from the selec-
tion list as they are assigned to a particular input.
Note: Priority levels do not need to be assigned consecutively.
For example, an installer could assign only 2 inputs to an ampli-
fier channel and give one the highest priority (1) and the other
the lowest (6). If the priority 1 input went inactive, the amplifier
would switch to the input with the next lowest priority (6). At
least one input source must be assigned to each amp channel
for proper operation.
7. Once you have finished assigning priorities for one amplifier, you can
press a different AMP button and proceed to program inputs for this
amplifier channel.
8. To exit the function, press EXIT. The display will again show ASSIGNMENT.
9. Press the NEXT or BACK buttons to scroll through the function menu or
press EXIT to return to users mode.
25