Filter
Top Products
Wiring Information
AUX Inputs
Unbalanced input sources other than microphones are connected to the
AUX INPUT jacks. The output lead from the source must be terminated in
an RCA-type plug. The input signal range is 100mVrms to 3Vrms and is
adjusted using the AUX TRIM controls.
Aux Input Trim Controls
See page 10 for adjustment procedure
Audio Process Link Wiring (PM-3180 Only)
Typical Audio Process Link wiring is illustrated below. See page 32 in the
Programming section to deactivate the internal connection between the pre-
amp out and power amp in so that the external equipment can be inserted.
Unbalanced
audio source
(CD/Tape/Tuner/Etc.
EQ Out
EQ In
17