Filter
Top Products
19
3.6 INPUT SETUP
Inputs and listening mode presets are configured in this section. From the factory, 5
inputs are set but you may change this to anything from 1 to 20 configurations.
To add an input at the end of the list, highlight Add Input and press Select.
To insert an input, highlight one on the list and press Input. The new input will be
inserted after the highlighted one.
To delete an input, highlight it and press Clear on the remote control.
These settings are displayed for each configuration:
Input Setup
HDMI 1
HDMI 2
HDMI 3
FM
AM
Add Input
HDMI 1 Setup
Input Name HDMI 1
Video Input HDMI 1
Audio Input HDMI
Zone 2 Input Analog 1
Process Analog Audio Input N/A
Speaker Profile Config 1
Anthem Room Correction N/A
Dolby Volume Off
Dolby Volume Leveler 5
Listening Mode for 2.0 Sources Last Used
Listening Mode for 5.1 Sources Last Used
Lip Sync 0 ms