Filter
Top Products
9
SPEAKERS
Connect using speaker wire. US models also allow banana plugs.
MRX 710 and MRX 510: If you are only using 5.1 speakers in the main zone, the two
remaining amp channels may be congured for use in Zone 2, or to bi-amp front L/R
in the main zone.
Connect the positive (+) connection on the speaker
to the positive (+) binding post on the appropriate
amplier output, and the negative (–) connection on the
speaker to the negative (–) binding post on the same
receiver channel using cable that is insulated to handle
the maximum output of the receiver. Carefully remove
insulation using a wire stripper.
If using speaker cables with banana connectors, rst turn the binding post until it is
closed. This way, the plug can be fully inserted.
Do not connect more than
one speaker to each amplier
output. Be sure that power is
turned off when connecting or
disconnecting anything and
that the speakers are rated for
use with this receiver.
+
–